Hi all,
I successfully compiled spca5xx.o
i use gcc 3.3.5, compile was successful after I remove
-mpreferred-stack-boundary=2
in compiler flags at Makefile, because this line generates error messages.
but when I use it with Logitech Communicate STX and camserv to grab
images, I get
(V4L) Video IOCTL: Invalid argument.
hope this helps.
--
Kharis
bibhu wrote:
> I am not able to compile spcaxxx either. Can't find any references..
> I have the quickcam.o ready for Linux 2.4.26-ts11. There were few
> errors here and there but its manageable.
> Mail me at and I will give you quickcam.o
>
> Bibhu
>
> --- In "newpants2004" <>
> wrote:
>
>> i did follow the link. success compiled video for linux module.
>>
>> but dont know how to cross compile the driver module (ov511, spca5xx
>> or quickcam)
>>
>> try to find a howto for cross compile, no luck.
>>
>> could you tell me how you did?
>> and could you email me your pre-complied module and spcaserv?
>>
>> thanks a lot!
>>
>>
>>
>>
>>
>> --- In "bibhu" <bibhu_420@> wrote:
>>
>>
>>> Follow this link. You will get your videodev.o
>>> http://vexrobot.blogspot.com/2006/11/cross-compiling-quickcam-web-
>>> cam.html
>>>
>>> --- In "newpants2004" <newpants2004@>
>>> wrote:
>>>
>>>> could you tell me more detail about how you did?
>>>>
>>>> i have no luck to compile the v4l.
>>>>
>>>> thanks
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> --- In "ilinsdell" <IanLinsdell@>
>>>>
> wrote:
>
>>>>> I've used an Omnivision USB camera with the 7400 board.
>>>>>
>>>>> I compiled the ov511 driver and videodev video for linux as a
>>>>>
>>>> loadable
>>>>
>>>>> modules from the ts11 kernel.
>>>>>
>>>>> Also compiled spcaserv to stream the video data over the inet
>>>>>
> to
>
>>>> the
>>>>
>>>>> spaserv Java applet.
>>>>>
>>>>> Worked great !
>>>>>
>>>>> --- In "Laks" <laks@> wrote:
>>>>>
>>>>>> Hi to every body,
>>>>>> Does any connected a Camera through the USB port of the
>>>>>>
> TS7250?
>
>>>>>> I will appreciate any help in this regard
>>>>>> -laks
>>>>>>
>>>>>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|