i did follow the link. success compiled video for linux module.
but dont know how to cross compile the driver module (ov511, spca5xx
or quickcam)
try to find a howto for cross compile, no luck.
could you tell me how you did?
and could you email me your pre-complied module and spcaserv?
thanks a lot!
--- In "bibhu" <> wrote:
> Follow this link. You will get your videodev.o
> http://vexrobot.blogspot.com/2006/11/cross-compiling-quickcam-web-
> cam.html
>
> --- In "newpants2004" <newpants2004@>
> wrote:
> >
> > could you tell me more detail about how you did?
> >
> > i have no luck to compile the v4l.
> >
> > thanks
> >
> >
> >
> >
> >
> >
> > --- In "ilinsdell" <IanLinsdell@> wrote:
> > >
> > > I've used an Omnivision USB camera with the 7400 board.
> > >
> > > I compiled the ov511 driver and videodev video for linux as a
> > loadable
> > > modules from the ts11 kernel.
> > >
> > > Also compiled spcaserv to stream the video data over the inet to
> > the
> > > spaserv Java applet.
> > >
> > > Worked great !
> > >
> > > --- In "Laks" <laks@> wrote:
> > > >
> > > > Hi to every body,
> > > > Does any connected a Camera through the USB port of the TS7250?
> > > > I will appreciate any help in this regard
> > > > -laks
> > > >
> > >
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|