[ts-7000] Re: How to write to flash on 7400

["j.chitte" <>]

--- In  "lippbruce" <> wrote:
>
> I'm confused about what I need to do to write a program to flash.  
I've 
> written an application and want it to be available when the board 
does 
> fastboot.  I've tried the tsinit routine shown in the manual, but 
> nothing seems to happen.  When I put in the commands by hand, I can 
> mount onboardflash but can't copy from the usb drive.  Do I need to 
> explicitly mount the usb drive first?
>

check the doc again, IIRC there's a jumper that write protects the 
flash.

HTH




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/