--- In "Anouk Ahamitet" <> wrote:
>
> I've collected what I've learned so far in downloading and building an
> ARM cross-compiler (using Dan Kegel's crosstool-0.43) and using it to
> build Qt/Embedded on a web page for anyone else with questions to
> read, copy, etc. It is pretty sparse, but I believe that all of the
> basic info is correct or close enough to manually make things work.
> Hopefully, it will save at least one person the weeks of frustration
> I've recently experienced trying to figure this out in the absence of
> one key fact (that the crosstool came from Dan Kegel, recently
> provided to me by Yan, thank you SO MUCH). So, for anyone interested,
> the page is at
>
> http://www.svalli.com/armccnotes.html
>
> I welcome corrections, enhancements and suggestions.
>
Cool, thanks. I've not had much luck with cross-compiling with
gcc-4.x; I'm still in the stone age with gcc-3.4.4. :-)
I don't know if you're aware that I maintain a wiki:
<http://www.seiner.com/ts7000/>
If you're interested, please post your HOWTO there.
Thanks,
--Yan
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|