I've collected what I've learned so far in downloading and building an
ARM cross-compiler (using Dan Kegel's crosstool-0.43) and using it to
build Qt/Embedded on a web page for anyone else with questions to
read, copy, etc. It is pretty sparse, but I believe that all of the
basic info is correct or close enough to manually make things work.
Hopefully, it will save at least one person the weeks of frustration
I've recently experienced trying to figure this out in the absence of
one key fact (that the crosstool came from Dan Kegel, recently
provided to me by Yan, thank you SO MUCH). So, for anyone interested,
the page is at
http://www.svalli.com/armccnotes.html
I welcome corrections, enhancements and suggestions.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|