[ts-7000] Using loadUSB and loadModules , can't disconnect cleanly

To:
Subject:	[ts-7000] Using loadUSB and loadModules , can't disconnect cleanly
From:	"vocemanago" <>
Date:	Tue, 11 Sep 2007 01:40:01 -0000

I am still using a USB development image which I connect to using the
loadUSBModules.sh and loadUSB.sh script.
I can't seem to cleanly unmount the drive. It always needs to be fixed
up when I shut down.
Anyone know where I am screwing up (besides recompiling the kernel to
access the USB drive directly I mean).
Tony



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Using loadUSB and loadModules , can't disconnect cleanly, vocemanago <=

Previous by Date:	[ts-7000] Re: Serial port wierdness on TS7250, Yan Seiner
Next by Date:	[ts-7000] Please Remove my Emailadress from this list immediately!, Daniel Rindt
Previous by Thread:	[ts-7000] Serial port wierdness on TS7250, naturalwatt
Next by Thread:	[ts-7000] Please Remove my Emailadress from this list immediately!, Daniel Rindt
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU