[ts-7000] Re: how to use AC97 in 7400, to play sounds

[Rodrigo Gómez <>]

--- In  "ilinsdell" <> wrote:
>
> --- In  Rodrigo Gómez <smrodin@> wrote:
> >
> > Hello everybody
> >
> > I have reader about playing sounds with  7400 board, but sincerely I
> > don't know where to start, Does any one give some direction?
> >
> > Thanks in advance
> >
> > Rodrigo
> >
>
> I have not used AC97, but have used I2S to play and record sound with
> the 7400.
>
> We used the following:
>
> 1. Cirrus Logic CS4271 Codec Chip.
> 2. 2.4.26-ts11 kernel with I2S and Sound enabled in the kernel.
> 3. Apps which read & write to /dev/sound
>    e.g. http://linux.about.com/library/cmd/blcmdl1_play.htm
>
> hope this is helpful
>

thanks for the help I will get the codec and
get the necesary software!




Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/