ts-7000
[Top] [All Lists]

[ts-7000] Re: Looking for TS11 RT directory

To:
Subject: [ts-7000] Re: Looking for TS11 RT directory
From: "Julien" <>
Date: Mon, 30 Jul 2007 12:57:28 -0000
Hello Ray

The path to kernel source tree is correct.

However I got the solution thanks to an answer sent to me in private
 : the name of the version is jut a matter of a field that can be 
modified in the Makefile before kernel compilation.

Now my kernel, modules, and RTAI files are all compiled with the 
version 2.4.26-ts11-rt... but I meet an other serious problem. I load/
write the kernel by TFTP under RedBoot, then I take all system files 
by NFS, and that works, but just one time ! If I reboot the system, I 
get a kernel panic.

I'll check if there is something on this in the mailing list, if not 
I'll probably post a new topic.

Thank you for your answer Ray.

Julien

--- In  "Ray" <> wrote:
>
> Hi Julien, 
> 
> check that CONFIG_RTAI_LINUXDIR points to the correct kernel source
> tree.  you will find it in .rtai_config which should be in the 
> rtai source directory.
> 
> Regards
> Ray
> 
> --- In  "Julien" <kaezar1@> wrote:
> >
> > Hi everybody
> > 
> > This post is mainly for the TS team, but any other help is of 
course 
> > welcome.
> > 
> > I would like to have on a TS7260 a system with TS11 RT 
(adeos+rtai), 
> > so I took the vmlinux-7260-ts11-rt.bin available on the FTP, and 
the 
> > tskernelmodules-2.4.26-ts11-rt.tar.gz + file system tarball. I 
just 
> > missed RTAI to get my system running.
> > 
> > I tried with TS11 kernel sources to patch and compile the kernel, 
> > just to have patched TS11 sources and so compile RTAI with these 
> > sources.
> > 
> > After RTAI compilation, when I try to launch lxrt modules, I got 
a 
> > kernel mismatch version 
> > "/usr/realtime/modules/rtai_usi.o was compiled for kernel version 
> > 2.4.26-ts11
> >         while this kernel is version 2.4.26-ts11-rt."
> > 
> > So is there a way to have final directory where TS11 RT kernel 
was 
> > compiled ? Could it be avalaible on the TS FTP ?
> > I would really appreciate it since I can't compile RTAI without 
the 
> > final sources directory of the kernel that I would like to use.
> > 
> > Thanks for your answer.
> > 
> > Julien
> >
>




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU