Hi Yan --
The on-board EP9302 A/D is documented in the user guide Frank
mentioned, Ch 20 IIRC. But according to the TS-7300 manual, only
one of the 5 channels is brought out to the DIO header (or two,
depending on which page of the manual you are on). The TS-7300
manual, the EP9301 manual, and the EP9302 datasheet should have the
info you need for using the onboard A/D.
If you mean the 4-channel A/d that comes on the TS-732 daughter
board, then sorry, I have no idea.
I haven't looked at the logger file you mentioned. Is it talking to
an A/D over SPI?
Regards, ......... Charlie
--- In "Frank Pagliughi" <>
wrote:
>
> Not sure about the A/D, but I believe the SPI is on the processor,
and
> is documented in the EP9301 manual (which also applies to the
EP9302):
>
> You can download it from the Cirrus site:
>
> www.cirrus.com/en/pubs/manual/EP9301_User_Guide.pdf
>
>
> Frank
>
> --- In "Yan Seiner" <yan@> wrote:
> >
> > Does anyone have a pointer to the docs for the SPI bus and the
EP9302
> > A/D for the TS7300?
> >
> > I'm looking for a programming manual...
> >
> > I'm trying to decipher the NetTempLogger.c in the files
section -
> > where does one get the address and port info?
> >
> > Thanks,
> >
> > --Yan
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|