hi,
I'll post this off the group so as not to clutter the thread, it's
probably an individual issue.
I tried you suggested command with slightly modifies headers to fit
my ~x86 kernel on the workstation.
after a bit of tweeking I got it this far.
../io/sys/stat.h:506: warning: C99 inline functions are not
supported; using GNU89
In file included from ../io/fcntl.h:38,
from ../include/fcntl.h:2,
from ../sysdeps/unix/sysv/linux/dl-osinfo.h:21,
from libc-start.c:32:
../include/sys/stat.h:23: warning: C99 inline functions are not
supported; using GNU89
../include/sys/stat.h:29: warning: C99 inline functions are not
supported; using GNU89
make[2]: Leaving directory `/usr/portage/tmp/cross/arm-softfloat-
linux-gnueabi/portage/cross-arm-softfloat-linux-gnueabi/glibc-2.5-r3/
work/glibc-2.5/csu'
make[1]: *** [csu/subdir_lib] Error 2
make[1]: Leaving directory `/usr/portage/tmp/cross/arm-softfloat-
linux-gnueabi/portage/cross-arm-softfloat-linux-gnueabi/glibc-2.5-r3/
work/glibc-2.5'
make: *** [all] Error 2
*
* ERROR: cross-arm-softfloat-linux-gnueabi/glibc-2.5-r3 failed.
I scanned the output going right back but could not find the original
error. I assume it would not stop because of the 'inline' warnings
(hundreds of em).
You say this compiled on your system.
Do you think I need to update to a 2.6.21 kernel or have I missed a
trick? I guess what you posted was just an outline so maybe I'm
missing a step.
Have you got this as far as producing running code or is it still
'work in progress'?
Thanks for any tricks that will save debugging problems you have
already solved.
regards, Jacques.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|