[ts-7000] EP9302 and gpio again ...

["PBosquet" <>]

Hello all,

Sorry for the little offtopic as i'm working with glomation board. but
as it's based on EP902 too, i dare to ask here ;)

I bought recently a GESBC-9302E boards (from glomation) and i've some
problems to modify the gpio. I searched this groups and found some
post about it, but none solve my problem (i recompile the code of Kwai
from old post but no luck).

First i've tried to write 1 to an DDR , that worked, but if i write
something to a DR, if i read the DR after, nothing changed :s 

As a test, i'm simply trying to setup high or low a DIO but without
success till now :s I'm trying to write to DeviceCFG 0x80930080 to
enabled gpio (bit 0x08000000UL) any help would be more than welcome
coz i'm loosing faith (i'm a n00b ^^)

here's the code http://www.pascalorama.info/brol/dio.c

thanks in advance

pascal




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/