Hello,
I have the 7400 board with the new image downloaded from the
embeddedarm web site. I can't seem to connect to the 7400 via ftp or
ssh. I have setup the keys for ssh and it now the service starts
up. If I log into the 7400 though the console port I can ssh and
ftp into itself. I can also ping the pc that I am trying to connect
from. But when I use putty for example to connect via port 22, I get
a time out message. Same with FTP.
Interfaces file /etc/network:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 10.0.13.20
network 10.0.0.0
netmask 255.255.0.0
broadcast 10.255.255.255
iface eth1 inet dhcp
iface wlan0 inet static
address 192.168.0.138
network 192.168.0.0
netmask 255.255.255.0
broadcast 192.168.0.255
I updated the hosts.allow file with the following, but no change.
ALL : ALL: allow
Is there a firewall setting or something I am missing? Searched the
web, but havent found anything to get it going.
Thanks!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|