Hello,
> i want to update the kernel in the board now.
> Have i really understand that i should only write it via:
> dd if=/mykernel of=/dev/mtd2
> Is that right?
> Which kernel i should place there the bzImage? Or should i use another
> command
> instead of "make" only?
Use mtdcopy, as it will work around bad
blocks.ftp://ftp.embeddedarm.com/ts-arm-linux-cd/binaries/ts-utils/mtdcopy
Also the kernel is stored on /dev/mtdblock/1 on the TS-7400.
--
Best Regards,
________________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|