ts-7000
[Top] [All Lists]

[ts-7000] Some modules refuse to load

To:
Subject: [ts-7000] Some modules refuse to load
From: "Yan Seiner" <>
Date: Mon, 25 Jun 2007 23:08:50 -0000
I'm having some trouble loading some modules on the 7300 - certain
modules absolutely refuse to load.

:root# modprobe usb-storage
/lib/modules/2.4.26-ts11/kernel/drivers/scsi/scsi_mod.o: couldn't find
the kernel version the module was compiled for
/lib/modules/2.4.26-ts11/kernel/drivers/scsi/scsi_mod.o: insmod
/lib/modules/2.4.26-ts11/kernel/drivers/scsi/scsi_mod.o failed
/lib/modules/2.4.26-ts11/kernel/drivers/scsi/scsi_mod.o: insmod
usb-storage failed

But...  I just built this module and most other modules load just
fine.  I am using a self-compiled kernel.

I've checked to make sure that the modules on my SD card are in fact
the same as the ones I built.  The md5sums are the same.

Lots of other modules load just fine:

:root# lsmod
Module                  Size  Used by    Not tainted
open_eth                4448   0  (unused)
sdcard1                 9848   0  (unused)
tsuart-733              1276   0  (unused)
tsuart-73               1228   0  (unused)
tsuart0                 8360   0  [tsuart-733 tsuart-73]
keybdev                 1716   0  (unused)
hid                    13976   0  (unused)
input                   3288   0  [keybdev hid]
usb-ohci-ep93xx          268   0  (unused)
usb-ohci               14864   0  [usb-ohci-ep93xx]
usbcore                53888   1  [hid usb-ohci]
pcipool                 1656   1  [usb-ohci]
ts7300fb                3360  64
fbcon-cfb16             3896   0  [ts7300fb]
fbgen                   2800   0  [ts7300fb]
sdcard0                 9840   2

Does anyone have any idea what might be going on?

Thanks,

--Yan



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU