Nickolas wrote:
>
> Hello,
>
> I cannot boot into redboot on my TS7300--when it boots it does the
> standard
>
> >> TS-SDBOOT - built Jul 6 2006
> >> Copyright ........
>
> I tried holding down control-c even before I plugged the board in, and
> also tried many times hitting control-c in varying rates after the
> board was plugged in. I read that flow control must be set to none--I
> did that, and I set the baud, parity rate, and stop bits according to
> the manual. Any ideas? It'd be great to get this working..! Thanks for
> any help
>
> Nickolas
>
For me it was the flow control that prevented it from working. I was
using minicom. What are you using to talk to the TS7300 with?
Jeff
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|