[ts-7000] Ser Port latency

To:
Subject:	[ts-7000] Ser Port latency
From:	"ndivner" <>
Date:	Fri, 15 Jun 2007 22:57:08 -0000

Hello to All,

I have become aware of the latency within the Kernel when using the 
normal serial port drivers and am wondering if anybody has experience 
of using the serial ports directly from User Land and whether they 
have any code they might share.

Thanks in advance,

Noel Diviney.



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Ser Port latency, ndivner <=

Previous by Date:	[ts-7000] Re: Starting application at power up, wkevinlogan
Next by Date:	[ts-7000] kernel 2.6.19 on TS-7250, Triffid Hunter
Previous by Thread:	[Fwd: Re: [ts-7000] Starting application at power up], michael
Next by Thread:	[ts-7000] kernel 2.6.19 on TS-7250, Triffid Hunter
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU