heinemc1 napsal(a):
> I am a software developer with quite a bit of experience but am new to
> the embedded world. My project will do quite a bit of floating point
> math and I was hunting around and ran across this article at
> linuxdevices (http://www.linuxdevices.com/articles/AT5920399313.html)
> which pointed me to (http://wiki.debian.org/ArmEabiPort).
>
> I have only been playing with my 7300 for a week now so I haven't had
> time to dig in and build my own root fs or try booting this.
>
> If you have worked with this, what kind of pointers do you have?
>
> Again, I'm new to the embedded world, am I way off base?
>
> While I'm posting, does anyone have recommendations on
> reference/learning materials? (especially on hardware... I've got the
> software).
>
Hi,
I spend now some time to try get work EABI on TS7250 but haven't
success. I usually use buildroot with uClibc and OABI without problem.
I now have working 2.6.18 with OABI. Now I try compile buildroot with
EABI enabled but all program crash with illegal instriction. I download
rootfs with EABI debian port but still the same. I mean that this is
kernel or CPU problem but I did't found solution.
Dan
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|