[ts-7000] TS-7200 and USB audio?

["djtopper" <>]

I've been told that just about any USB dongle will work with the
TS-7200.  Based on TS feedback, I went with the following:

http://www.usbgear.com/computer_cable_details.cfm?sku=USBG-SV5&cats=136&catid=136%2C121

Boot messages say:

ub.c: new USB device not_pci-3, assigned address 2
usb.c: USB device 2 (vend/prod 0xd8c/0xc) is not claimed by any active
driver.
Setting up networking...done.
Starting hotplug subsystem: usbinsmod: insmod: a module named input
already exi\sts
insmod: insmod: insmod hid failed
insmod: insmod: a module named input already exists
insmod: insmod: insmod hid failed

Now, when I compiled my kernel, I just did the basic stuff:

make ts7200_config
make oldconfig
make dep
make vmlinux
make modules
etc...

I didn't compile in a sound module.  So a few questions on that:

1.  When I type "make menuconfig" now, will it inherit all the current
settings from "make ts7200_config" and "make oldconfig" above?

2.  I don't see many options for sound.

Support for Turtle Beach MultiSound Classic, Tahiti, Monterey (│ │
Support for Turtle Beach MultiSound Pinnacle, Fiji (NEW)       │ │
OSS sound modules (NEW)                                        │ │
AD1980 front/back switch plugin (NEW)                          │ │
Wolfson Touchscreen/BMON plugin (NEW)  

I don't think OSS supports USB audio.  Should I set up alsa on the
card?  That seems like a huge project to cross compile.  

Anyone else using USB audio on the 7200 or any other 7xxx board?

Thanks,

DT




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/