[ts-7000] Problems dumping / saving current kernel with 'fis write'

["djtopper" <>]

I'm trying to grab the existing kernel on my TS-7200 board.  It's the
one that came with the board.  I'm trying to do this with fis write,
using the stock CF card that also came with the board.

First, I grab the memory info from fis:

RedBoot> fis list
Name              FLASH addr  Mem addr    Length      Entry point
(reserved)        0x60000000  0x60000000  0x00E20000  0x00000000
RedBoot           0x60E20000  0x60E20000  0x00040000  0x00000000
vmlinux           0x60E60000  0x00218000  0x00160000  0x00218000
RedBoot config    0x60FC0000  0x60FC0000  0x00001000  0x00000000
FIS directory     0x60FE0000  0x60FE0000  0x00020000  0x00000000

Then I try to dump via fis write

RedBoot> fis write -f 0x60E6000 -b 0x00218000 -l 0x00218000

But I get the following error:

Invalid FLASH address 0x060e6000: Invalid FLASH address
   valid range is 0x60000000-0x60ffffff

Is it possible to dump the existing kernel from RedBoot to the CF card?

Thanks,

DT



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/