ts-7000
[Top] [All Lists]

[ts-7000] Re: Hello, TS 7300

To:
Subject: [ts-7000] Re: Hello, TS 7300
From: "juanyrascon" <>
Date: Mon, 21 May 2007 20:31:18 -0000
Hi,

Yes, the SD are in the right slot when looking at the back.
Yes, 5 volts and 1 amp

--- In  "PeterElliot" <> wrote:
>
> I have two thoughts:
> 
> 1. Did you put the SD Card in the correct slot (nearest the CPU) - 
> Right slot when looking at the back.
> 2. Is you're power supply providing sufficient power?
> 
> Regards,
> 
> PJE
> 
> --- In  "juanyrascon" <juanyrascon@> wrote:
> >
> > 
> > Hi, I have my first 7300, but I have a little problem.
> > 
> > I am booting it with the SD that comes with the TS 7300 (Debian) 
> but 
> > i dont what happens, the red center remains blinking and the 
green 
> too 
> > but by less time.
> > 
> > Sorry for my english :(
> > 
> > Thanxs in advance
> >
>




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU