[ts-7000] How do yo u know if you have the 8 ch. 12 bit a/d on the 7250

["loki2517" <>]

Hello,

My robotics club recently bought a TS-7250 and I have been tasked with
writing the code to read some light detectors in on the A/D converter.
 I thought we bought the optional A/D that has faster reads and is
individually controlable, but I can't tell for sure.  All of the
documentation that came with the board cover both cases.  The
schematics shows the 8 channels going into the Max197 chip, but I
don't see that chip on the board.  Also, I only have 10 pins on the
A/D header.  I'm assuming that we don't have the A/D due to the
missing 6 pins from the header, but I was wondering if there is a way
to tell from the serial number on my board?

Thank,




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/