Andrea,
Thanks a lot.
Where did you place that how-to, on ALSA web site? ("Compile ALSA
driver for the 2.4 kernel ")
You said "there are some patches around", any particular one that
you can recommend? Sorry for bugging you, but this knowledge might
save some of my time...
Thanks,
Igor
--- In Ciaccia <> wrote:
>
> > 4. Can one give advice/recipe how to enable i2s sound on TS-7400?
> > Use 2.6.19, apply Brett's patch (http://www.mynah- software.
com/arm/)
> > and then what?
>
>
>
>
> If I'm not wrong, one of the latest TS-2.4 kernels supports
I2S/CS4271 on the TS-7400 (I don't remember if with ALSA or OSS).
Anyway, as I have already said before, the driver is far from being
perfect... :-|
>
> If you don't want to move to the 2.6 (TS-unsupported) kernel, you
can do the following:
>
> 1. Compile ALSA driver for the 2.4 kernel (I added a mini how-to
months ago)
> 2. Load the ALSA moduled when required
>
> The current ALSA driver does not contain I2S support the EP93XX,
so you have to add it (there are some patches around) and write
support for your CODEC (this part will never be integrated in ALSA,
since each TS-7400 can potentially use a different CODEC which uses
different IO pins).
>
> Good Luck
> Andrea
>
>
>
>
>
_____________________________________________________________________
_______________
> TV dinner still cooling?
> Check out "Tonight's Picks" on Yahoo! TV.
> http://tv.yahoo.com/
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|