[ts-7000] Re: test TS7300 DIO1 Header

["dave_w_hawkins" <>]

I found reference a similar problem in;

http://tech.groups.yahoo.com/group/ts-7000/message/4283

Using that code also fails to toggle the port B[4,3,1,0] 
pins as output, though port B[7,6,5] pins work fine.

As far as I know, this board is new and was never
used. So its unlikely that someone has connected
5V and popped the pins. Its also unlikely that
this board, and that of the original poster were damaged
identically, given that we both observe the same
outputs not working.

Cheers,
Dave




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/