[ts-7000] Re: NFS access to Mac OSX

["cingospet" <>]

--- In  "cingospet" <> wrote:
>
> I am trying to access files on a Mac OSX 10.4 using NFS on a TS-7000 
> (WIFIBOX).  I 
configure 
> the Mac as the NFS host at 192.168.0.10 and do the following on the TS-7000.
> 
> $ portmap &
> $ mount -t nfs 192.168.0.10:/users/export /mnt/root
> 
> The board knows the volume is there, I can check with moun and get:
> 
> $ mount
> /dev/root on / type ext2 (rw)
> none on /dev type devfs (rw)
> /proc on /proc type proc (rw)
> /dev/mtdblock/3 on /mnt/root type yaffs (rw)
> 192.168.0.10:/users/export on /mnt/root type nfs 
> (rw,v3,rsize=8192,wsize=8192,hard,udp,lock,addr=192.168.0.10)
> 
> I can even see the size of the volume and free space.  But after I copy files 
> to the 
directory, I 
> do not see anything from the TS-7000.  I can see 'root' in '/mnt' but 
> /mnt/root is 
empty.
> 
> Any clues?
> Craig
>
OK, I found the problem.  OSX 10.4 uses NFS v4.  To have th TS-7000 access the 
share, 
the opts field in netinfo needs to have "32bitclients"

Craig




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/