--- In "asc135" <> wrote:
>
> --- In "raaku66" <raaku66@> wrote:
> >
> > I have successfully been able to send over the pl2303 driver only
a
> > maximum of 64 bytes is there a way to increase this,
> > the 2.6 version of this driver has a CONSTANT that sets the
> buffersize
> > to 1024, i would like to know if anyone out there is able to
patch
> the
> > existing pl2303 to allow for this???
> >
>
> No, the buffer size is not the problem. The real problem is
related
> to an errant USB bus message. It is fixed and works very well now.
>
> Look in the files section for pl2303.zip which should correct that
> transmit problem you are seeing.
>
> It contains the source code and driver module compiled for the ts11
> version of the 2.4 kernel. For other ts kernel versions you'll
have
> to build the modules yourself.
>
> Good luck.
>
> Amardeep
>
I have used the pl2303.zip and copied and recompiled the modules, and
then taken the .o file and mounted
i still can only send a max of 64 bytes at a time,
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|