--- In "raaku66" <> wrote:
>
> I have successfully been able to send over the pl2303 driver only a
> maximum of 64 bytes is there a way to increase this,
> the 2.6 version of this driver has a CONSTANT that sets the
buffersize
> to 1024, i would like to know if anyone out there is able to patch
the
> existing pl2303 to allow for this???
>
No, the buffer size is not the problem. The real problem is related
to an errant USB bus message. It is fixed and works very well now.
Look in the files section for pl2303.zip which should correct that
transmit problem you are seeing.
It contains the source code and driver module compiled for the ts11
version of the 2.4 kernel. For other ts kernel versions you'll have
to build the modules yourself.
Good luck.
Amardeep
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|