ok
i've created the pl2303.o file and have copied it
to /lib/modules/2.4.xxx/kernel/drivers/usb/serial/
and now all i can send accross it is 64 bytes at a time,
is there a way to increase this.
Regards Matt
--- In Eddie Dawydiuk <> wrote:
>
> Hello,
>
> > i have compiled a ts7400 kernel and i cannot get past the 3 dots.
> > nothing is booting from sd boot.
>
> You will need to make some modifications to Technologic's default
> initial ramdisk on an SD card if you modify your bootrom to boot
> directly to the SD card. You can find an updated sdcard driver,
linuxrc2
> script and documentation on how to do this here
> ftp://oz.embeddedarm.com/sdboot_7400/
>
> > also i cannot get the pl2303 driver to function properly
>
> Please refer to message #4768
> http://tech.groups.yahoo.com/group/ts-7000/message/4768
>
> Best Regards,
> ______________________________________________________________
> Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
> 16610 East Laser Drive Suite 10 | fax: (480) 837-5300
> Fountain Hills, AZ 85268 | web: www.embeddedARM.com
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|