[ts-7000] Re: TS-7300 FPGA

["bibhu" <>]

Answering to a part of my own question:
I opened the ts7300_opencore.qpf in Quartus II. Then I compiled 
ts7300_top.v and transferred the .rbf file to the board. Then I 
loaded the .rbf on the FPGA using load_ts7300.

But my question is:

1)How do i give input to a simple D-ff or a Mux program?
----I used to give a simple +x volts to the pin assigned on my 
previous FPGAs.
2)Where do I check the outputs?

--- In  "bibhu" <> wrote:
>
> Hi ,
> 
> I have a simple flip-flop program in Verilog.
> 
> 1)How do I load the raw binary files on the FPGA? Or do I need to 
load 
> any other files?
> 2)How do I check the output?
> 3)Is it possible to connect the TS-7300 board to a logic analyzer? 
> 
> I had worked on FPGAs 2-3 years back. I had used JTAG cables and 
all.
> I realized we don't need any JTAG cables for TS-7300.
> 
> Thanks,
> 
> Bibhu
>




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/