| To: | |
|---|---|
| Subject: | Re: [ts-7000] TS_XDIO for VGA signals |
| From: | Eddie Dawydiuk <> |
| Date: | Mon, 26 Mar 2007 15:52:41 -0700 (MST) |
On Sat, 24 Mar 2007, hockeyjo14 wrote:
> I believe this has been asked before, however I have not seen an answer
> or solution: is there a technique to map the FPGA signal lines (pins on
> DIO) that have VGA assignments on them to TS_XDIO signals?
This would require a custom bitstream. If you would like to pursue this
contact me off list and we could discuss your requirements...
//Eddie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] Re: transferring floating point data from PC to TS7300, Christopher Friedt |
|---|---|
| Next by Date: | Re: [ts-7000] Re: Greg Kroah-Hartman's response to SD-flash close source driver solution:, Christopher Friedt |
| Previous by Thread: | [ts-7000] TS_XDIO for VGA signals, hockeyjo14 |
| Next by Thread: | [ts-7000] rs232 comm., islandwind |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU