[ts-7000] TS_XDIO for VGA signals

["hockeyjo14" <>]

I believe this has been asked before, however I have not seen an answer 
or solution: is there a technique to map the FPGA signal lines (pins on 
DIO) that have VGA assignments on them to TS_XDIO signals? I need alot 
of I/O pins and I do not want to use the VGA output function. I have 
seen mention that the VGA needs to be disabled to use these signals as 
I/O. I have successfully been able to use XDIO API for the pins on 
connector DIO2 and wanted to use the same method for all the TS_XDIO 
pins. Thanks in advance.

hockeyjo



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/