ts-7000
[Top] [All Lists]

Re: [ts-7000] help with debian\

To: "ts-7000" <>
Subject: Re: [ts-7000] help with debian\
From: "" <>
Date: Fri, 23 Mar 2007 09:56:00 +0100
Command (m for help): p

Disk /dev/sde: 1023 MB, 1023934464 bytes
16 heads, 32 sectors/track, 3906 cylinders
Units = cylinders of 512 * 512 = 262144 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sde1               1           4        1008   da  Non-FS data
/dev/sde2               5           8        1024   da  Non-FS data
/dev/sde3               9        3906      997888   83  Linux

Command (m for help): q


 Desktop]# ext2resize /dev/sde3/
bash: ext2resize: command not found

 Desktop]# dd if=fastboot-7300-sdcard-7-6-2006.dd of=/dev/sde
488448+0 records in
488448+0 records out
250085376 bytes (250 MB) copied, 103,377 seconds, 2,4 MB/s
 Desktop]#  

it is right as partitions and dd copyng ?


---------- Initial Header -----------

>From      : 
To          : "ts-7000" 
Cc          :
Date      : Thu, 22 Mar 2007 10:25:32 -0700 (MST)
Subject : Re: [ts-7000] help with debian\







> Hello,
>
> > TS-SDBOOT - Built OCt 17 2006
> > copiright (c) 2006 Tecnology Systems
> > and nothig else is a problem of debian or of TSsdboot ?( i use only jumper 
> > 2 on the board )
>
> The MBR on the SD card is not being read, please ensure your card is in
> the correct SD slot. Please post the dd command you ran to write the
> image to your SD card as well as the output.
>
> //Eddie
>
> > ---------- Initial Header -----------
> >
> > From      : 
> > To          : "ts-7000" 
> > Cc          :
> > Date      : Wed, 21 Mar 2007 11:57:37 -0700 (MST)
> > Subject : Re: [ts-7000] help with debian\
> >
> >
> >
> >
> >
> >
> >
> >> Hello,
> >>
> >>> ive rebuild the sd image on a new sd and when i try to connect it in ts 
> >>> 7300 i haven't response
> >>> ( i veinstalled only the jumper 2 ) it is correct ?
> >>> i ve dothe procedure and if i see the files on sd are equal at the 
> >>> original files on the sd that i ve bought .
> >>> whats   the problem ? why ts sdboot don't find the debian on sd ? is 
> >>> there a tecnical support that answer me in fast mode ?
> >>
> >> What output do you see with the SD card inserted in the TS-7300?
> >>
> >> //Eddie
> >>
> >>> ---------- Initial Header -----------
> >>>
> >>> From      : 
> >>> To          : 
> >>> Cc          :
> >>> Date      : Wed, 21 Mar 2007 09:01:26 -0700 (MST)
> >>> Subject : Re: [ts-7000] help with debian\
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>> Hello,
> >>>>
> >>>>> i nedd to reinstall debian on sd because if i restart my sbc (ts7300)
> >>>>> the ts sdboot don't start
> >>>>> can anyone explicit me the procedure to install debian on sd ?
> >>>>> please i can do nothing in this mode .!!!!
> >>>>
> >>>> The procedure is documented here
> >>>> http://www.embeddedarm.com/epc/fastboot.htm.
> >>>>
> >>>> //Eddie
> >>>>
> >>>
> >>>
> >>> ------------------------------------------------------
> >>> Con Prometeo prestiti senza spese fino a 31.000 Euro! Clicca qui
> >>> http://click.libero.it/webnation21m07
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> Yahoo! Groups Links
> >>>
> >>>
> >>>
> >>>
> >>>
> >>
> >
> >
> > ------------------------------------------------------
> > Con Prometeo prestiti senza spese fino a 31.000 Euro! Clicca qui
> > http://click.libero.it/webnation21m07
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>


------------------------------------------------------
Leggi GRATIS le tue mail con il telefonino i-mode? di Wind
http://click.libero.it/imode





Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/


<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU