Hello,
> Is the source code for zd.o available?
Yes, Technologic didn't write this driver we just make a precompiled
driver available. You can find the homepage here
http://zd1211.ath.cx/wiki/VendorBasedDriver.
//Eddie
> --- In Eddie Dawydiuk <> wrote:
>>
>> Hello,
>>
>>> I'm having the exactly the same problem as you and Patty with 2 brand
>>> new TS7260 cards and IOGEAR USB wireles devices (purchased Feb
> 7,2007).
>>
>> The revision r83 driver that was on our FTP site was originally compiled
>> for a TS-WIFIBOX/TS-7400. The current shipping TS-7400 kernel has a
>> newer version of the wireless extensions in the kernel than the other
>> TS-7xxx products. I've moved the previously compiled rev 83 driver to
>> the r83/ts7400 folder
>> (ftp://oz.embeddedarm.com/wireless/zd1211/r83/ts7400/zd.o) and
> recompiled
>> the rev 83 driver against the kernel that is currently shipping on all
>> other TS-7xxx products. I've verified the reported problems as well as
>> the driver currently on the FTP site is properly working on a TS-7xxx
>> boards with the current shipping kernel.
>>
>> ftp://oz.embeddedarm.com/wireless/zd1211/r83/zd.o
>>
>> Let me know if you see any problems with the new driver.
>>
>> //Eddie
>>
>>> --- In "Gonzalo A. de la Vega"
> <gadelavega@> wrote:
>>>>
>>>> I had the same problem with my new TS-7260s. I just changed the
> kernel
>>>> to ts9, and everything works fine (you have to get zd.o from the
>>>> ftp.embeddedarm.com/wireless/zd1211/r53/ directory, which has been
>>>> built for ts9)
>>>>
>>>> Gonzalo
>>>>
>>>> --- In "pattykirsch" <kirsch@> wrote:
>>>>>
>>>>> Did this get resolved? I seem to be having the same problem on a
>>>>> TS-7200 but this isn't doing it for me.
>>>>>
>>>>> Patty
>>>>>
>>>>> --- In "Don W. Carr" <doncarr@> wrote:
>>>>>>
>>>>>> It worked for me on a 7260. Here is what I had that I think
>>>> someone else
>>>>>> posted before. On the newer 7260, they might install more of the
>>>>> modules by
>>>>>> default.
>>>>>>
>>>>>> insmod usbcore
>>>>>> insmod pcipool
>>>>>> insmod usb-ohci
>>>>>> insmod usb-ohci-ep93xx
>>>>>> insmod scsi_mod
>>>>>> insmod sd_mod
>>>>>> insmod /path/to/zd.o
>>>>>>
>>>>>> ifconfig wlan0 up
>>>>>> iwconfig wlan0 essid wappy
>>>>>> ifconfig wlan0 192.168.0.99
>>>>>> ping 192.168.0.5
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 12/29/06, Tom <tl@> wrote:
>>>>>>>
>>>>>>> Hmm, I am still stuck. Anyone have any suggestions? I
> neglected to
>>>>>>> mention that I'm using the included WIFI-G-USB option from
>>>>>>> embeddedarm.com, an IOGear GWU-523. Has anyone else gotten this to
>>>>> work
>>>>>>> with a TS-7260?
>>>>>>>
>>>>>>> Tom
>>>>>>>
>>>>>>>
>>>>>>> Tom McCarty wrote:
>>>>>>>
>>>>>>>> Hi all, I just bought a TS-7260 a couple of days ago, and I
>>>>> can't get
>>>>>>>> the wireless interface to work. The USB drivers seem to be
>>>>> working, but
>>>>>>>> the iwconfig command doesn't seem to do anything, and I can't
> find
>>>>>>>> anything in the archives with this particular problem.
>>>>>>>>
>>>>>>>> A full log of my interaction from bootup is included below, but
>>>>> I think
>>>>>>>> the salient part is this, where iwconfig doesn't seem to do
>>>>> anything,
>>>>>>>> and looks like it's reading from a corrupted data structure.
>>>>>>>>
>>>>>>>> $ iwconfig wlan0 essid pleasework
>>>>>>>> $ iwconfig wlan0 mode ad-hoc
>>>>>>>> $ ifconfig wlan0 192.168.0.2
>>>>>>>> $ iwconfig
>>>>>>>> lo no wireless extensions.
>>>>>>>>
>>>>>>>> eth0 no wireless extensions.
>>>>>>>>
>>>>>>>> wlan0 \· ≡x¼*îâ ESSID:off/any Nickname:""
>>>>>>>> NWID:off/any Mode:Managed Frequency:2.412 GHz
>>>>>>>> Access Point: FF:7F:B4:5C:AD:2A Bit Rate:1 Mb/s Tx-Power=off
>>>>>>>> Sensitivity=2147482204/3
>>>>>>>> Retry:off RTS thr=2432 B Fragment thr:off
>>>>>>>> Encryption key:<too big>
>>>>>>>> Power Management:off
>>>>>>>> Link Quality:0 Signal level:0 Noise level:0
>>>>>>>> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
>>>>>>>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>>>>>>>>
>>>>>>>> I've tried "$iwconfig wlan0 nick test", too, but no iwconfig
>>>>> line seems
>>>>>>>> to change the output of just "$iwconfig" except to specify the
>>>>>>>> interface, in which case the output is slightly different:
>>>>>>>> $ iwconfig wlan0
>>>>>>>> wlan0 � ╖ ESSID:off/any Nickname:""
>>>>>>>> NWID:off/any Mode:Managed Frequency:2.412 GHz
>>>>>>>> Access Point: Not-Associated Bit Rate:1 Mb/s Tx-Power=off
>>>>>>>> Sensitivity:0/3
>>>>>>>> Retry:off RTS thr=2432 B Fragment thr:off
>>>>>>>> Encryption key:<too big>
>>>>>>>> Power Management:off
>>>>>>>> Link Quality:0 Signal level:0 Noise level:0
>>>>>>>> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
>>>>>>>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>>>>>>>>
>>>>>>>>> From my as-shipped system, here's what I have done to it:
>>>>>>>>
>>>>>>>> uploaded zd.o to /root from
>>>>> ftp://ftp.embeddedarm.com/wireless/zd1211
>>>>>>>> <ftp://ftp.embeddedarm.com/wireless/zd1211>
>>>>>>>> uploaded iwconfig,iwlist, iwspy to /usr/bin from
>>>>>>>> ftp://ftp.embeddedarm.com/wireless/wireless_tools
>>>>>>>> <ftp://ftp.embeddedarm.com/wireless/wireless_tools>
>>>>>>>> uploaded libiw.so.28 to /lib from
>>>>>>>> ftp://ftp.embeddedarm.com/wireless/wireless_tools
>>>>>>>> <ftp://ftp.embeddedarm.com/wireless/wireless_tools>
>>>>>>>>
>>>>>>>> I'm following the instructions in the Linux Arm guide v2.2,
>>>>> however, the
>>>>>>>> zd.o at
>>>>>>>>
> ftp://ftp.embeddedarm.com/ts-arm-linux-cd/binaries/ts-modules/zd.o
>>>>>>>>
>>>> <ftp://ftp.embeddedarm.com/ts-arm-linux-cd/binaries/ts-modules/zd.o>
>>>>>>>> is for ts10, and wouldn't work with my ts11 system, so I got a
>>>> more
>>>>>>>> recent version from another location on the web site.
> According to
>>>>>>>> iwconfig --version, it should work, but obviously isn't.
>>>> Anyone have
>>>>>>>> suggestions?
>>>>>>>>
>>>>>>>> TIA,
>>>>>>>>
>>>>>>>> Tom
>>>>>>>> -----
>>>>>>>>
>>>>>>>> Technologic Systems TS-LINUX/arm 7.0
>>>>>>>> ts7200 login: root
>>>>>>>> login[81]: root login on `ttyAM0'
>>>>>>>>
>>>>>>>> BusyBox v1.00-rc2 (2004.08.05-21:44+0000) Built-in shell (ash)
>>>>>>>> Enter 'help' for a list of built-in commands.
>>>>>>>>
>>>>>>>> $ insmod usbcore
>>>>>>>> Using /lib/modules/2.4.26-ts11/kernel/drivers/usb/usbcore.o
>>>>>>>> usb.c: registered new driver usbdevfs
>>>>>>>> usb.c: registered new driver hub
>>>>>>>> $ insmod pcipool
>>>>>>>> Using /lib/modules/2.4.26-ts11/kernel/arch/arm/common/pcipool.o
>>>>>>>> $ insmod usb-ohca
>>>>>>>> insmod: usb-ohca.o: no module by that name found
>>>>>>>> $ insmod usb-ohci
>>>>>>>> Using /lib/modules/2.4.26-ts11/kernel/drivers/usb/host/usb-ohci.o
>>>>>>>> $ insmod usb-ohci-ep93xx
>>>>>>>> Using
>>>>> /lib/modules/2.4.26-ts11/kernel/drivers/usb/host/usb-ohci-ep93xx.o
>>>>>>>> usb-ohci.c: USB OHCI at membase 0xe0020000, IRQ 56
>>>>>>>> usb.c: new USB bus registered, assigned bus number 1
>>>>>>>> hub.c: USB hub found
>>>>>>>> hub.c: 3 ports detected
>>>>>>>> $ hub.c: new USB device not_pci-3, assigned address 2
>>>>>>>> usb.c: USB device 2 (vend/prod 0xace/0x1211) is not claimed
> by any
>>>>>>>> active driver
>>>>>>>> .
>>>>>>>> insmod scsi_mod
>>>>>>>> Using /lib/modules/2.4.26-ts11/kernel/drivers/scsi/scsi_mod.o
>>>>>>>> SCSI subsystem driver Revision: 1.00
>>>>>>>> $ insmod sd_mod
>>>>>>>> Using /lib/modules/2.4.26-ts11/kernel/drivers/scsi/sd_mod.o
>>>>>>>> $ insmod zd.o
>>>>>>>> Using zd.o
>>>>>>>> zd1211 - http://zd1211.ath.cx/ <http://zd1211.ath.cx/> - r83
>>>>>>>> Based on www.zydas.com.tw driver version 2.5.0.0
>>>>>>>> usb.c: registered new driver zd1211
>>>>>>>> Release Ver = 4802
>>>>>>>> EEPORM Ver = 4330
>>>>>>>> PA type: 0
>>>>>>>> AiroHa AL2230RF
>>>>>>>> AllowedChannel = 000107ff
>>>>>>>> Region:16
>>>>>>>> $ ifconfig wlan0 up
>>>>>>>> $ iwconfig wlan0 essid pleasework
>>>>>>>> $ ifconfig wlan0 192.168.0.2
>>>>>>>> $ iwconfig wlan0 mode ad-hoc
>>>>>>>> $ iwconfig
>>>>>>>> lo no wireless extensions.
>>>>>>>>
>>>>>>>> eth0 no wireless extensions.
>>>>>>>>
>>>>>>>> wlan0 \· ≡x¼*îâ ESSID:off/any Nickname:""
>>>>>>>> NWID:off/any Mode:Managed Frequency:2.412 GHz
>>>>>>>> Access Point: FF:7F:B4:5C:AD:2A Bit Rate:1 Mb/s Tx-Power=off
>>>>>>>> Sensitivity=2147482204/3
>>>>>>>> Retry:off RTS thr=2432 B Fragment thr:off
>>>>>>>> Encryption key:<too big>
>>>>>>>> Power Management:off
>>>>>>>> Link Quality:0 Signal level:0 Noise level:0
>>>>>>>> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
>>>>>>>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>>>>>>>> $ iwconfig --version
>>>>>>>> iwconfig Wireless-Tools version 28
>>>>>>>> Compatible with Wireless Extension v11 to v20.
>>>>>>>>
>>>>>>>> Kernel Currently compiled with Wireless Extension v16.
>>>>>>>>
>>>>>>>> wlan0 Recommend Wireless Extension v13 or later,
>>>>>>>> Currently compiled with Wireless Extension v18.
>>>>>>>>
>>>>>>>> $ iwconfig wlan0
>>>>>>>> wlan0 � ╖ ESSID:off/any Nickname:""
>>>>>>>> NWID:off/any Mode:Managed Frequency:2.412 GHz
>>>>>>>> Access Point: Not-Associated Bit Rate:1 Mb/s Tx-Power=off
>>>>>>>> Sensitivity:0/3
>>>>>>>> Retry:off RTS thr=2432 B Fragment thr:off
>>>>>>>> Encryption key:<too big>
>>>>>>>> Power Management:off
>>>>>>>> Link Quality:0 Signal level:0 Noise level:0
>>>>>>>> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
>>>>>>>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>>>>>>>>
>>>>>>>> $
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Dr. Don W. Carr
>>>>>> J. G. Montenegro 2258
>>>>>> Guadalajara, Mexico
>>>>>> +52-333-630-0704
>>>>>> +52-333-836-4500 ext 2930
>>>>>>
>>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Check out the new improvements in Yahoo! Groups email.
http://us.click.yahoo.com/4It09A/fOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|