|
I want to use LCD display and 4x4 keypad (come with board) to make
some functions (such as A/D conversion, Digital I/O) without using
another computer's help. To do so, I need to make sure that the board
login and run program automatically when I feed 5V to the board. I think now you know what I wanna to do clearly. let me go to my board case. I tried to make some change in the "/etc/init.d" and "/etc/rc.d/rc3.d" by using the following command. (My TS-7200' kernel is TS-Kernel and default run-level is 3). 1. Firstly I compiled the lcdmesg (LCD Display) in my host computer (cannot compile in the board bez of no gcc compiler is installed by default) and ftp to the board and put inside "/etc/init.d" folder. After that change to the executable mode to lcdmesg. 2. Then " chmod a+rx lcdmesg" . 3. Go to /etc/rc.d/rc3.d and type " ln -s /etc/init.d/lcdmesg S21lcdmesg". ( In that case I don't know how to make the S level for my display, so I set to 21). The following is the links included in rc3.d file for remarks. {S10Network S11portmap S20inetd S30telnetd S40apache S90ts7kvfb} Then, I reboot my board. But I see only the word "start" and cannot use the LCD display ( if i go to the /etc/init.d and separately run lcdmesg, it work. But i doesn't work automatically). Do I need to set dedicated level in rc3.d file? Do you have any idea to develop my idea? Cheers! Naing. Real people. Real questions. Real answers. Share what you know. __._,_.___
SPONSORED LINKS
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |