Is anyone using the TS-7260 with the TS-RF2-AERO with the external
antenna?
If so, are there any antenna mounting or installation instructions I
should know about?
I just got a couple of the AREO boards, plugged them into the P/C 104
slot, attached the external antenna to the card, and powered up the 7260.
The first 7260 I tried this on went into a boot loop, rebooting itself
before the boot process complete.
The second box, with a second AERO board, ran for a while before
spontaneously rebooting itself a couple of times.
I disconnected the antennas, and got the same results.
Do I need to physically mount the antenna on the enclosure (thereby
grounding it)?
Is there something more to installing the card than plugging it into
the socket?
Seems unlikely that two AERO cards would be bad, or that they are
incompatibly with the 7260; I must be missing something.
Regards,
jw
------------------------ Yahoo! Groups Sponsor --------------------~-->
See what's inside the new Yahoo! Groups email.
http://us.click.yahoo.com/0It09A/bOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|