[ts-7000] ts-7400 getting started

[Tuğrul GÜÇLÜ <>]

Hi All

 

I ‘m newbie to TS7400 board and development kit.

I developed my application under Mandrake 10,1 with gcc installed.

But now i guess i have to compile it for arm920t

Can someone tell me how to do that?

 

In the CD i received there are some cross-toolchains. Some have   (crosstool-cygwin-gcc-3.3.2-glibc-2.3.2.tar,

crosstool-cygwin-gcc-3.3.4-glibc-2.3.2.tar,

crosstool-linux-gcc-3.3.4-glibc-2.3.2-0.28rc39.tar,

crosstool-linux-gcc-3.3-glibc-2.2.5.tar,

crosstool-linux-gcc-4.0.1-glibc-2.3.5.tar)

 

I have cygwing installed on my PC , I want  to compile code under cygwin and then  transfer the binary to arm card.Which  tool do I have to use ?

 

What is the arguments to be passed to gcc ?

İ trid this , but didn’t work

“gcc  -lpthread –lm file.c –mcpu=arm920t –o file.out”

(-lpthread , -lm are application specific parameters)

 

Regards

 

 

---

From: [ On Behalf Of jywmpg
Sent: Sunday, March 11, 2007 4:05 AM
To:
Subject: [ts-7000] Re: 7260: Installing Debian distro on an SD Card

 

Luis,

I came to a similar conclusion shortly after I posted the instructions.

I am a little gun shy, now that I have a working system, to go the
resize route. But I think it is the right way to go. Perhaps split
the difference and resize part3 to be larger, then recreate the fourth
partition of, say, 1 GB.

PJE,

The problem with the fourth partition is that you are left with not so
much room on the third partition if you want to add packages to the
system.

Of course, one can certainly mount the fourth partition read/write and
even move subdirs like /var or /usr/share into the fourth partition to
make room in the third partition. But that may be more trouble than
it's worth, assuming the resize option is bulletproof.

Regards,

jw

--- In .com, "PeterElliot" <> wrote:
>
> --- In .com, Luis Ortega <lortega@> wrote:
> >
> > Success!!!!
> >
> > The new initrd that Eddie mentioned and available at:
> >
> > http://www.seiner.com/ts7000/index.php/Booting%20to%20SDCard
> >
> > made the difference.
> >
> > As to your instructions What I would recommend would be to reuse
> part3
> > instead of creating a part4 in which to place your debian file
> system.
> > The instructions for doing so are at:
> >
> > http://www.seiner.com/ts7000/index.php/Copying%20Boot%20SDCard
> >
> > where you redefine your part3 with fdisk (in my case using a
> different
> > dd image I had to start part3 at 20 instead of 9) and after a
> reboot you
> > check and resize with:
> >
> > e2fsck -f /dev/sdcard1/disc0/part3
> >
> > resize2fs /dev/sdcard1/disc0/part3
> >
> > I certainly feel much better about my TS-7260 now. I guess I should
> buy
> > it a case now. :-)
>
> Good to hear you got it working.
>
> I'm trying to work out the relative merits of the forth partion over
> extending the third partion to use all the available space.
>
> I'm using a TS-7300, and I would like to fastboot, but to be able to
> store confguration data on the same SD card, leaving the second SD
> card for the user.
>
> With the forth partition, can I simply mount that partition read/
> write while the OS runs from read only partitions.
>
> Thoughts...
>
> PJE
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___