This may be the second posting of the same problem. It didn't seem to
work the first time.
I have a Satellite modem connected to the COM2 (ttyAM1) port on a 7260
but I can not get any responce out of it. I know it works, since I
connect it to my PC and can both create a dial up connection to it or
use hyperterm to get a response (ATZ OK)and dial out(#777) no problem.
But when I connect it to the 7260 and use Minicom, microcom or pppd I
don't get any responce. All the settings are correct, I use setserial
to make sure the port is configured, I commented out the getty command
in /etc/inittab. Still no responce?
I did redirect and echo to /dev/ttyAM1 and see show up in hyperterm so
I know data will go out of the port. This seems so straightforward,
what did I miss?
Bill
------------------------ Yahoo! Groups Sponsor --------------------~-->
Something is new at Yahoo! Groups. Check out the enhanced email design.
http://us.click.yahoo.com/kOt0.A/gOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|