ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: help with external adc

To:
Subject: Re: [ts-7000] Re: help with external adc
From: Eddie Dawydiuk <>
Date: Wed, 7 Mar 2007 15:28:23 -0700 (MST)
Hello,

> how i can use com2 with ts 732? i ve seen that if i try to use
> echo /dev/ttyAM1 i haven't response .
> ( i ve try to disconnect the CAN  cable from the board so the com must
> be commanded from the ts7300 but i haven't a positive response .

COM2 is implemented in the EP9302 and should not be affected by any
peripherals. Are you implying COM2 works ok with out the TS-732 but 
is not working with the TS-732?

> My answers are :
> 1) is possible to load automatically the driver ? insmod tsuart-732

Yes, load them in the init scripts.

> 2) how i can acces to com2 ( dev/ttyAM1 with and without the CAN
> connection enable from the TS 732?)

Just as you would any other serial port from Linux. If you are not
familiar with serial port programming in Linux I would recommend
refering to "Serial Programming HOWTO"
http://tldp.org/HOWTO/Serial-Programming-HOWTO/index.html

> 3) is there a full documentation about ts 7300 and ts 732? because the
> actual documentation sometime isn't so esplicit .

The TS-7300 manual is available here
http://www.embeddedarm.com/Manuals/ts-7300-manual-rev1.2.pdf

The TS-732 manual is available here
http://www.embeddedarm.com/Manuals/TS-ENC730.pdf

The Linux for ARM on TS-7000 User's Guide is available here 
http://www.embeddedarm.com/Manuals/linuxarm-guide-rev2.2.pdf

If you have any questions that are not answered in these documents
please let us know...

//Eddie


------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/hOt0.A/lOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU