i ve do it ( tnks ) another question :
how i can use com2 with ts 732? i ve seen that if i try to use
echo /dev/ttyAM1 i haven't response .
( i ve try to disconnect the CAN cable from the board so the com must
be commanded from the ts7300 but i haven't a positive response .i
haven't found documentaion so i hope u can help me .
My answers are :
1) is possible to load automatically the driver ? insmod tsuart-732
2) how i can acces to com2 ( dev/ttyAM1 with and without the CAN
connection enable from the TS 732?)
3) is there a full documentation about ts 7300 and ts 732? because the
actual documentation sometime isn't so esplicit .
Best Reguards Emiliano Pifferi
------------------------ Yahoo! Groups Sponsor --------------------~-->
See what's inside the new Yahoo! Groups email.
http://us.click.yahoo.com/0It09A/bOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|