On Sun, 4 Mar 2007, Jim Jackson wrote:
> On Sat, 3 Mar 2007, yoobb wrote:
>
> > Hi,
> >
> > What's the tolerance on the power input voltage of the TS-7200?
>
> It has to be a REGULATED 5v power supply. So the answer is not much
> tolerance. Technologics, in the TS7200 Draft[1] user Manual have a note on
> page 6 saying that applying more than 6v can damage the board. I'd stick
> to 5v.
I forgot to add this note
[1] I couldn't find this in Version 2 of the User Manual! It may have been
removed for a purpose!
>
>
> > I have a cell phone charger power supply marked "OUTPUT: DC 5.1V 700mA".
> >
> > Is this power supply suitable for the TS-7200?
>
> connect up a dummy load and measure the voltage on no-load and on load.
> If you read 5.1v volts for both, it is probably a regulated PSU
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Something is new at Yahoo! Groups. Check out the enhanced email design.
http://us.click.yahoo.com/kOt0.A/gOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|