Hi all !
I have received my board yesterday, I have very happy !
I have successfully compiled my application and the library
dependences, which is an SIP softphone, Linphone.
I have used crosstool because the compilation directly on the board
was too long !
The application work well on the board, but for now sound is not
available ;)
Now I need to build a new kernel with AC'97 module driver. But where
to put this new kernel and how boot it ???
What is the best thing to do ?
Put the new kernel directly in the final filesystem, in the sd card
for example, and use bootload to boot from this new kernel ?
But when this new kernel will boot, I think it will not see 'init'
because on the sd card root filesystem ? I must first use an initrd to
load the sd card module ?
Regards
------------------------ Yahoo! Groups Sponsor --------------------~-->
Great things are happening at Yahoo! Groups. See the new email design.
http://us.click.yahoo.com/lOt0.A/hOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|