ts-7000
[Top] [All Lists]

[ts-7000] Newbie question about flash problem

To:
Subject: [ts-7000] Newbie question about flash problem
From: "phillipchungnz" <>
Date: Fri, 23 Feb 2007 03:40:27 -0000
Hi,

I'm a newbie in the world of building an embedded Linux product. I've
recently joined a new company and inherited an existing TS-7400 board
and Linux software (which someone else set up and wrote - that someone
else has left the company).

My problem is that after I download the Linux software into the
TS-7400 via the TS-9441 board, and power-cycle the TS-7400 for the
**SECOND** time, I get the following error:

>> TS-FLASHBOOT - built Sep 21 2006
>> Copyright (c) 2006, Technologic Systems
.
>> flash ECC error!

which repeats. The red LED on the TS-7400 blinks.

HELP: How do I fix this error so that the TS-7400 boots up correctly
after the first power-cycle?



I spoke to Eddie from Technologic on the phone and he said that
because only 1 dot appears on boot-up, the error occurs during the
bootloader process when it's trying to read from flash.


When I power-cycle the TS-7400 the **FIRST** time after downloading
the Linux software, it works:

>> TS-FLASHBOOT - built Sep 21 2006
>> Copyright (c) 2006, Technologic Systems
.
.
.
Running initrd (squashfs)
mounting /proc filesystem
mounting flash
mounting rootfs (squashfs)
default config flag is set
pivot root
remount procfs
remount devfs
create ramfs
remount nv
bind config
run init
init started:  BusyBox v1.00-rc2 (2007.02.13-22:36+0000) multi-call binary
Magtek DC01
Running rc.sysinit
release ramdisk
mounting fstab
 Confguring ip address and hostname.
Using /lib/modules/2.4.26-ts11/kernel/net/packet/af_packet.o
Using /lib/modules/2.4.26-ts11/kernel/arch/arm/common/pcipool.o
Using /lib/modules/2.4.26-ts11/kernel/drivers/usb/usbcore.o
now mounting /proc/bus/usb
-n Loading modules:
Using /lib/modules/2.4.26-ts11/kernel/drivers/usb/host/usb-ohci.o
Using /lib/modules/2.4.26-ts11/kernel/drivers/usb/host/usb-ohci-ep93xx.o

Exiting rc.sysinit


BusyBox v1.00-rc2 (2007.02.13-22:36+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

$

Many thanks for any suggestions or ideas.



------------------------ Yahoo! Groups Sponsor --------------------~--> 
See what's inside the new Yahoo! Groups email.
http://us.click.yahoo.com/0It09A/bOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups - Join or create groups, clubs, forums &amp; communities. Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups - Join or create groups, clubs, forums &amp; 
communities. is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
  • [ts-7000] Newbie question about flash problem, phillipchungnz <=
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU