Hello,
> I am trying to format /dev/sdcard1/disc0/disc. The CF is 2GIG, and I
> need the entire 2GIG as one partition.
The TS-7400 should support up to 4GB SD cards, although the TS-7260 and
TS-7300 only support up to 1GB SD cards. In the next couple of weeks the
TS-7260 and TS-7300 will also support up to 4GB. I'll send a message to
this list when this is available.
> I figured out how to do this a few months ago with a 1GIG CF (and I
> remember it took a while to figure it out) but after I run mke2fs -b
> 1024 /dev/sdcard1/disc0/disc and mount it, I only get a 1GIG partition,
> according to df -h. I tried a block size of 2048, and the mke2fs
> default blocksize (the one it hueristically computes if you don't
> specify a block size) of 4096. They both complete the formatting but
> won't mount.
There was a problem with the SD card driver that only allowed it to work
with filesystems with a 1KB block size. This issue was resolved a couple
of months ago.
//Eddie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|