[ts-7000] TS7300 COM 7-10 & NON-STANDARD BAUD RATES

["rpt1234" <>]

I am using a TS7300 and could use a few tips on the FPGA serial 
ports.  

I need to activate the additional serial ports that use the CTS and 
RTS lines for transmit and receive on ports 3-6.  Can somebody point 
me to the specific register and bit to change?

The devices I need to communicate with use an off the wall baud rate.  
Can anybody point me in to information I can use to set the baud rate 
dividers and equations so I can get close?  I am hoping there is an 
easy way to change this.

Thanks in advance,
Rich



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/