[ts-7000] TS-ENC730 Enclosure

To:
Subject:	[ts-7000] TS-ENC730 Enclosure - How To
From:	"Rafael_Sotomayor" <>
Date:	Thu, 14 Dec 2006 19:21:09 -0000

I would like to know the pin distribution for the TS-ENC730.
I mean, what correspond to 1,2,3,4,5,6,7,8
What are the inputs ?
What are the outputs ?
What are the GND ?

------------------------
Terminal strip with 8 I/O
    * 5 channel 10 bit ADC 0V - 5V (12-16 bits effective*)
    * 2 channel 12 bit high power DAC 0V - 10V (sync/source 300mA)
----------------------------

Regards

Rafael 



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS-ENC730 Enclosure - How To, Rafael_Sotomayor <=

Previous by Date:	[ts-7000] Re: problem with SSP : spi format + Slave Mode ... + I2S, suptouch
Next by Date:	Re: [ts-7000] Re: LCD readable and other fonts?, Per-Olof
Previous by Thread:	[ts-7000] Re: problem with SSP : spi format + Slave Mode ... + I2S, suptouch
Next by Thread:	[ts-7000] which pin triggers interrupt, chentom60
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU

[ts-7000] TS-ENC730 Enclosure - How To