--- In "sipnj" <> wrote:
>
> From manual p44.
>
> <<Buttons
> ----------
> The TS-7300 includes a push-button which causes a full-system reset,
> exactly the same as if the power were cycled.>>
>
> I dont see a button on the board. Is there one or do I have to suppy
> my own.
>
I haven't looked at my 7300 board, but I for one would love to have a
reset button header option. It's kind of hard to reach the reset
button on the 7200 when it's burried in the center of the board under
2 or 3 PC104 cards....
Just like the reset button on PCs. That way, I could run it into a
PLC and force an external reset on watchdog failure.
--Yan
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|