I'd also like to say for the fix, works ok.
Rafael
--- In "sipnj" <> wrote:
>
> Hi Eddie,
>
> Thanks for the fix. May I suggest also changing the date of the file
> on your website? For whatever reason my browser was still bringing up
> the old file from cache.
>
>
> --- In Eddie Dawydiuk <eddie@> wrote:
> >
> > Hello,
> >
> > Some of the GPIO pins that are brought out to the DIO1 header are
> > multipurpose pins, they can be configured as GPIO pins or as DMA
lines.
> > In order to achieve a faster boot time the TS-7300's bootrom is using
> > DMA. As a result some of the GPIO lines on the DIO1 header were
> > configured for DMA, this is why the keypad example program was not
> > working. I've modified the source to disable the DMA on GPIO
feature in
> > the init routine of the keypad sample code. You can download the
> updated
> > code from our website in the example code section.
> >
> > http://www.embeddedarm.com/downloads/samplecode/keypad.c
> >
> > Let me know if you have any problems...
> >
> > //Eddie
> >
> > > I have the exact same problem, still did not find a solution. If you
> > > did please post it, I will also post whatever I find.
> > >
> > >
> > > --- In "Rafael_Sotomayor"
> > > <rafael_sotomayor@> wrote:
> > >>
> > >> I have tested again, and I discovered that works only when I
> press the
> > >> third row, I mean (7,8,9,2nd)
> > >>
> > >> Thanks.
> > >> Rafael Sotomayor
> > >>
> > >> --- In "Rafael_Sotomayor"
> > >> <rafael_sotomayor@> wrote:
> > >>>
> > >>> Hello,
> > >>>
> > >>> I connected to the DIO-1 the OP-KPAD that comes as an extra for
> > >>> TS-7300. Then I run the keypad ( compiled from keypad.c ).
> > >>>
> > >>> So, It did not work. What I'm doing badly ?
> > >>>
> > >>> Am I correct when I connect the OP-KPAD to the DIO-1 ?
> > >>> Has anyone other program to test ?
> > >>>
> > >>> Thanks
> > >>> Rafael Sotomayor
> > >>>
> > >>
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|