|
If it is any help... I have the same issue with an rtai-enabled 2.4.26 kernel. The standard 2.4.26 kernel that I built using the same tools, PC, etc. works well. The rtai kernel is slightly larger -- by about 20k. Interesting hypothesis. Do you have a similar problem when you issue the 'reboot' command? I get a bunch of numbers and finally: Backtrace: not available Code: e595406c e2856068 e1540006 0a00003d (e5941008) Unable to handle kernel NULL pointer dereference at virtual address 00000008 I was thinking it was something wrong with how I built the kernel itself... something that would prevent both the 'reboot' and 'bootload' programs from running correctly...???
Hi > Boot a compressed kernel image: > $ bunzip -c vmlinux.bin.bz2 | bootload - I have been able to boot an image of linux kernel 2.4.26, but I'm not able to boot a kernel 2.6.18. The "linux boot loader" hungs after the following messages: [...] valid: 000e6000:0 valid: 000e7000:0 Is there any restriction to the size of the kernel image (kernel 2.6 is bigger than 2.4)? Have you any idea / suggestion? Thanks, Marco Pracucci Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/ts-7000/join (Yahoo! ID required) <*> To change settings via email: <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ __._,_.___
SPONSORED LINKS
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |