As the previous reader pointed out, this is due to soft/hard ware flow
control. Switch both off in minicom or hyperterm. I had the same
issue, and the 0.1 s statement from the boot sequence only adds to the
confusion.
Gertjan
--- In fernando torres <> wrote:
>
> Hi,
>
> I would appreciate very much if some one can help me
> with this issue. I can not interrupt RedBoot default
> script execution on a Development Kit for a Linux -
> ARM -TS-7260 system sending CTRL ? C keystroke. I have
> notice that the system prompt me to do that within
> 0.1 seconds instead ¨1¨ second as I expected (from the
> Techologic System documentation).
>
>
>
> Thanks in advance,
>
> Fernando
>
> __________________________________________________
> Correo Yahoo!
> Espacio para todos tus mensajes, antivirus y antispam ¡gratis!
> ¡Abrí tu cuenta ya! - http://correo.yahoo.com.ar
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|