[ts-7000] Accessing DIO2 in 7300

To:
Subject:	[ts-7000] Accessing DIO2 in 7300
From:	"mekala_new" <>
Date:	Mon, 20 Nov 2006 16:50:12 -0000

Hi,
 I am new to this group. I have used DIO1 in 7300 as a general IO
header to connect keypad and other devices.Could we use DIO2 as a
general IO pin too? I would like to connect a relay in DIO2. Also I
need a +5v input for relay but DIO2 has only +3.3v. Any suggestions
are welcome..

Thanks,
Mekala





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Accessing DIO2 in 7300, mekala_new <= Re: [ts-7000] Accessing DIO2 in 7300, Alvaro Aguirre

Previous by Date:	[ts-7000] Re: Using the DIO pins., sipnj
Next by Date:	[ts-7000] Zigbee, Yan Seiner
Previous by Thread:	[ts-7000] accessing a USB device, shweta bhandari
Next by Thread:	Re: [ts-7000] Accessing DIO2 in 7300, Alvaro Aguirre
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU