--- In "kendwyer" <> wrote:
>
> Hi
>
> I am using Cygwin with Croostools (crosstool-cygwin-gcc-3.3.4-
glibc-
> 2.3.2.tar.bz2) and attempting to get my toolchain corectly
> configured. This is what I have done so far:
>
> 1: Installed Cygwin
>
> 2: Extracted cygwin crosstools to /usr/local
> tar xvjf crosstools-cygwin-gcc-3.3.4-glibc-2.3.2.tar.bz2
>
> 3: Extracted TS9 source code to /usr/src
> tar xvzf tskernel-2.4.26-ts9-src.tar.gz
>
> The above creates a linux24 directory in /usr/src
>
> 4: Next, cd to /usr/src/linux24 and update CROSS_COMPILE in the
> Makefile:
> CROSS_COMPILE=/usr/local/opt/crosstool/gcc-3.3.4-glibc-2.3.2/arm-
> unknown-linux-gnu/bin/arm-unknown-linux-gnu-
>
> 5: make memuconfig
> 6: make dep
> 7: make vmlinux
>
> The last make compiles for a while and then fails as shown
> below.....Does anyone have any idea on this failure?
>
> Many thanks
> Ken
>
>
> ....
> .......
> /usr/local/opt/crosstool/gcc-3.3.4-glibc-2.3.2/arm-unknown-linux-
> gnu/bin/arm-unk
> nown-linux-gnu-ar rcs video.o
> make[4]: Leaving directory `/usr/src/linux24/drivers/media/video'
> make[3]: Leaving directory `/usr/src/linux24/drivers/media/video'
> make all_targets
> make[3]: Entering directory `/usr/src/linux24/drivers/media'
> rm -f media.o
> /usr/local/opt/crosstool/gcc-3.3.4-glibc-2.3.2/arm-unknown-linux-
> gnu/bin/arm-unk
> nown-linux-gnu-ld -r -o media.o video/video.o radio/radio.o
> make[3]: Leaving directory `/usr/src/linux24/drivers/media'
> make[2]: Leaving directory `/usr/src/linux24/drivers/media'
> make -C misc
> make[2]: Entering directory `/usr/src/linux24/drivers/misc'
> make all_targets
> make[3]: Entering directory `/usr/src/linux24/drivers/misc'
> /usr/local/opt/crosstool/gcc-3.3.4-glibc-2.3.2/arm-unknown-linux-
> gnu/bin/arm-unk
> nown-linux-gnu-gcc -D__KERNEL__ -I/usr/src/linux24/include -Wall -
> Wstrict-protot
> ypes -Wno-trigraphs -Os -fno-strict-aliasing -fno-common -Uarm -
fno-
> common -pipe
> -mapcs-32 -D__LINUX_ARM_ARCH__=4 -march=armv4 -msoft-float -
Uarm -
> nostdinc -
> iwithprefix include -DKBUILD_BASENAME=ts_sbcinfo -c -o
ts_sbcinfo.o
> ts_sbcinfo
> .c
> ts_sbcinfo.c: In function `sbc_setinfo':
> ts_sbcinfo.c:44: error: `TS7XXX_MODEL' undeclared (first use in
this
> function)
> ts_sbcinfo.c:44: error: (Each undeclared identifier is reported
only
> once
> ts_sbcinfo.c:44: error: for each function it appears in.)
> ts_sbcinfo.c:60: error: `TS7XXX_IO16_BASE' undeclared (first use
in
> this functio
> n)
> ts_sbcinfo.c: In function `sbc_read_proc':
> ts_sbcinfo.c:99: warning: unused variable `temp'
> make[3]: *** [ts_sbcinfo.o] Error 1
> make[3]: Leaving directory `/usr/src/linux24/drivers/misc'
> make[2]: *** [first_rule] Error 2
> make[2]: Leaving directory `/usr/src/linux24/drivers/misc'
> make[1]: *** [_subdir_misc] Error 2
> make[1]: Leaving directory `/usr/src/linux24/drivers'
> make: *** [_dir_drivers] Error 2
>
looks like the configuration is not correct... I just re-built the
kernel for 7250 using the autobuild_for_customer script. give it a
try...
Liangyao
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|